Using the 32bit snakeoil on two different machines (one gigabyte ga-3050n-d2p and one intel dn2800mt motherboard) I experience the following:
The volume output through an ESI gigaport HD+ DAC is very low. Using either machine though a Hegel H80 integrated DAC the level is normally loud. ALSA mixer is set to 100% in all cases. Have also tried different USB cables.
Plugging a Windows PC into the gigaport DAC the output is as loud as you’d expect, so the DAC CAN indeed output a ‘normal’ signal, but doesn’t with the snakeoil machines connected.
Is there anything in Snakeoil OS that could cause one DAC but not another to interpret the signal as being lower in volume?
The Gigaport DAC may off course be faulty in which case this is not a Snakeoil issue. Before I buy another one to test that option I thought I’d post a question here.
Edit: I should add that I do know of others people who successfully use this DAC with these motherboards and Snakeoil OS without experiencing similar issues. So it’s not a fundamental compatibility issue.
The volume output through an ESI gigaport HD+ DAC is very low. Using either machine though a Hegel H80 integrated DAC the level is normally loud. ALSA mixer is set to 100% in all cases. Have also tried different USB cables.
Plugging a Windows PC into the gigaport DAC the output is as loud as you’d expect, so the DAC CAN indeed output a ‘normal’ signal, but doesn’t with the snakeoil machines connected.
Is there anything in Snakeoil OS that could cause one DAC but not another to interpret the signal as being lower in volume?
The Gigaport DAC may off course be faulty in which case this is not a Snakeoil issue. Before I buy another one to test that option I thought I’d post a question here.
Edit: I should add that I do know of others people who successfully use this DAC with these motherboards and Snakeoil OS without experiencing similar issues. So it’s not a fundamental compatibility issue.