29-Sep-2021, 10:38 PM (This post was last modified: 30-Sep-2021, 12:11 AM by seafoodlover.)
hi kith,
after the installation 1.2.0 then upgrade to 1.2.1, myMPD always show MPD disconnected, how to fix? please help.
I stored the music in the internal hdd which is /dev/sdb1/Music, the system is installed in /dev/sda1
update: other mpd clients work perfectly, e.g. cantata, Rigelian, & MALP
(01-Oct-2021, 04:14 PM)seafoodlover Wrote: Seems not, but anyway, I send you my diagnostic file, but if u don’t have time, u can put it in low priority, as I can use other mpd client.
Apologies for the late reply. Took a break past day and a half as I was hooked into "Squid Games" ..
I know what the problem is, will try and do a fix and post the solution soon.
(03-Oct-2021, 10:16 AM)agent_kith Wrote: Can you guys try uploading this module and see if mympd works now? If yes, I'll update the 1.2.1 firmware thread for folks to apply this.
^ This will also be fixed in 1.2.2 when available.
it works, must restart after installed the update.
Having the same problem on my RPi4 ("MPD disconnected") I tried this solution however the fw above does not work for raspbian. Then I tried the mympd-Fix-1_0_2-armv7l.fw fix from the older post, but after applying that, MyMPD is no longer working at all via port 8080. Any advice?
Our mission is to create a free to use computer OS that is easy to install, intuitive to operate and play music that will connect and engage with you emotionally.
SnakeoilOS gives you the freedom to spend more time on listening, enjoying and exploring music. Wasting time on computers is now a thing of the past! Everything is constantly evolving/improving. Please check back often for updates.
If you like this project, do show your support with a small token donation. All donations collected will be used to run this website, and for purchasing new equipment for the project.