Snakeoil Firmware - 1.2.7 (Gear Isolation U7)

[agent_kith]

Introduction
A quick second release to address additional issues identified in 1.2.6. No big/major changes like before, just some minor fixes to make life easier.


Changelog

• Fixed false error detection when a RAM disk is already created
  
• Fixed problem when deleting a process priority entry didn't activate the "Save" button
  
• Removed unused attribute cgroup in API GET snakeoil/hardware. Just use cpuset instead
  
• Fix backend utils::tokenise command to skip consecutive delimiters
  
• Fix issue where cpuset option always uncheck itself on save
  
• Update upmpdcli public key
  
• Install libid3tag if it's not already installed
  

Downloads
  snakeoil-armv7l-1.2.7.fw (Size: 52.11 MB / Downloads: 20)
(SHA1: 8e53b628457b556c85fae6d68710d447462a8e26)
  snakeoil-x86_64-1.2.7.fw (Size: 57.78 MB / Downloads: 94)
(SHA1: ed285c50edaedd8c1c0f74c4c0f734fd5e832dc5)

[cenz]

hi Keith,

My mpd pc just upgrade from 1.2.5 to 1.2.7, but the Status shows "x" from "software" box on "Music Player" page, 1.2.6 also. 1.2.5 just fine. 

[agent_kith]

hi Keith,

My mpd pc just upgrade from 1.2.5 to 1.2.7, but the Status shows "x" from "software" box on "Music Player" page, 1.2.6 also. 1.2.5 just fine. 

Interesting. Will not be releasing a new update to address this, but I will just release a new MPD module so you can get MPD playing. But before that need to understand what the problem is firs.t

Can you generate a diagnostic file and send it to me? Thanks.

[cenz]

hi Keith,

My mpd pc just upgrade from 1.2.5 to 1.2.7, but the Status shows "x" from "software" box on "Music Player" page, 1.2.6 also. 1.2.5 just fine. 

Interesting. Will not be releasing a new update to address this, but I will just release a new MPD module so you can get MPD playing. But before that need to understand what the problem is firs.t

Can you generate a diagnostic file and send it to me? Thanks.

hkphantomgtr suggests me to fresh install 1.2.6 first, cos my mpd base is old installer (v1.1.x), fresh install 1.2.x hope fix this problem i think... anyway i will send you diagnostic file later.

[cenz]

hi Keith,

My mpd pc just upgrade from 1.2.5 to 1.2.7, but the Status shows "x" from "software" box on "Music Player" page, 1.2.6 also. 1.2.5 just fine. 

Interesting. Will not be releasing a new update to address this, but I will just release a new MPD module so you can get MPD playing. But before that need to understand what the problem is firs.t

Can you generate a diagnostic file and send it to me? Thanks.

hkphantomgtr suggests me to fresh install 1.2.6 first, cos my mpd base is old installer (v1.1.x), fresh install 1.2.x hope fix this problem i think... anyway i will send you diagnostic file later.

diagnostic file email send, thanks

[agent_kith]

diagnostic file email send, thanks

Thanks.. A bit busy at the moment, I'll have a check later in the week (prob Thurs at the earliest).

As of now, no versions of MPD Is working for you, correct? Do you have a banner saying pulseAudio is installed? What happens when you uninstall Pulse?

[cenz]

diagnostic file email send, thanks

Thanks.. A bit busy at the moment, I'll have a check later in the week (prob Thurs at the earliest).

As of now, no versions of MPD Is working for you, correct? Do you have a banner saying pulseAudio is installed? What happens when you uninstall Pulse?

Now, I fresh install 1.2.6 and install 1.2.7 FW successfully. Before fresh install, there no shows "pulse audio" bar in 1.2.7 FW.

Now the Minor issue is myMPD app:
1. I set Homescreen's home icon which is disappear after reboot
2. myMPD auto generated "Smart playlist" always shown even I disable auto-gen function before.

Thanks kith

[agent_kith]

Now, I fresh install 1.2.6 and install 1.2.7 FW successfully. Before fresh install, there no shows "pulse audio" bar in 1.2.7 FW.

So MPD is working for you now?

Now the Minor issue is myMPD app:
1. I set Homescreen's home icon which is disappear after reboot

Don't understand what you're saying :p, can you rephrase your problem in another way?

2. myMPD auto generated "Smart playlist" always shown even I disable auto-gen function before.

Newer versions of myMPD changed the way it's configured (no longer relying on a config file now). I'll get back to you on how to manually disable this from the CLI later today (yet to try but this should be possible). I also hate smart lists.

[misko1989]

for me 1.2.7 did not work. i am using upmpdcli. after i reverted back to 1.2.5, everything works perfectly as always... hope this feedback helps somehow...

[agent_kith]

for me 1.2.7 did not work. i am using upmpdcli. after i reverted back to 1.2.5, everything works perfectly as always... hope this feedback helps somehow...

Upgrading to latest version of Ubuntu should make it work again. There is this library (a software package) called glibc, and newer versions of this will not run on older systems.

This is kind of the reason why Snakeoil has moved away from ISO and go with an installer for new installs. Because software keeps changing and it's difficult and time consuming to make the player work on both new and old operating systems.

You can update your Snakeoil PC by running: sudo do-release-upgrade

And follow the prompts. (Best to research on the Internet for full instructions if this is something you havn't done before)