Login

***Coacharnold*** · 07-May-2021, 06:51 AM

Been testing on and off all day, got LMS running pretty good. But since building my full collection in LMS I rebooted and have no web server?

I still get the snakeoilweb server, but only a white and blank page

I suspect maybe there is a conflict with LMS's web server? ...

You mentioned needing to post instructions for LMS... was it anything more complicated than just starting it.

thanks for this project ... fun stuff
T

***agent_kith*** · (This post was last modified: 07-May-2021, 07:23 AM by agent_kith.)

(07-May-2021, 06:51 AM)Coacharnold Wrote: Been testing on and off all day, got LMS running pretty good. But since building my full collection in LMS I rebooted and have no web server?

I still get the snakeoilweb server, but only a white and blank page

I suspect maybe there is a conflict with LMS's web server? ...

You mentioned needing to post instructions for LMS... was it anything more complicated than just starting it.

thanks for this project ... fun stuff
T

Interesting.. Shouldn't conflict with LMS as it is using port 9090 or 9000 from memory. However, some plugins may be using port 80? The port the Snakeoil WebApp is using.

Can you SSH to your computer, and run the following commands? Give me the output here so I can take a look.

Code:
sudo systemctl status lighttpd

sudo netstat -tulpn | grep 80

***Coacharnold*** · (This post was last modified: 07-May-2021, 07:20 AM by Coacharnold.)

(07-May-2021, 07:01 AM)agent_kith Wrote:
(07-May-2021, 06:51 AM)Coacharnold Wrote: Been testing on and off all day, got LMS running pretty good. But since building my full collection in LMS I rebooted and have no web server?

I still get the snakeoilweb server, but only a white and blank page

I suspect maybe there is a conflict with LMS's web server? ...

You mentioned needing to post instructions for LMS... was it anything more complicated than just starting it.

thanks for this project ... fun stuff
T
Interesting.. Shouldn't conflict with LMS as it is using port 9090 or 9000 from memory. However, some plugins may be using port 80? The port the Snakeoil WebApp is using.

Can you SSH to your computer, and run the following commands? Give me the output here so I can take a look.

Code:
sudo system status lighttpd sudo netstat -tulpn | grep 80

Ok ... so I think you mean sysctl -- I get

sudo sysctl status lighttpd
sysctl: cannot stat /proc/sys/status: No such file or directory
sysctl: cannot stat /proc/sys/lighttpd: No such file or directory

or maybe not ...it is alive .... i mean I do get a very minimal web interface, I seem to be able to get to everything, but the menu is completely gone, so I have to input it from URL to get to different pages.

i get

sudo netstat -tulpn | grep 80
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 771/lighttpd
udp6 0 0 :::53804 :::*

T

I should add a screenshot, as this is what I have ... mind you, it was a blue background, Its like its half loading.

For what its worth, LMS is working pretty good.

T

***agent_kith*** · (This post was last modified: 07-May-2021, 07:28 AM by agent_kith.)

(07-May-2021, 07:08 AM)Coacharnold Wrote: Ok ... so I think you mean sysctl -- I get

Sorry. Just woke up here. Big Grin

I mean systemctl. So it's

Code:
sudo systemctl status lighttpd

(07-May-2021, 07:08 AM)Coacharnold Wrote: sudo netstat -tulpn | grep 80

Looks like the WebApp have crashed for some reason. What browser are you using? Can you press F12 to get to the debug menu, and go to the "Console" tab and see if there are any errors?

Note, I'll be off to work soonish but will try and pick this up later after (~10 hours from now). In the meantime, try this with Firefox or Chrome and see if the problem persists.

Edit: Looks like this is a Brave browser, which is based on Chromium, so should work. I'll download this browser later today to try it out.. Always cool to try different browsers.

***Coacharnold*** · 07-May-2021, 07:55 AM

WOW ... end of the day here ..... but then I suppose you on the OTHER SIDE OF THE PLANET from me, LOL

So i get the same output in chrome, so it's not the browser. I'm trying to find something in the developer tools, but I can't remember how to get in there, I've remapped my f11 key for my pop up terminal (woops)

here's quick look at my HTOP ...LMS is still building the full text index so it seems to be using a lot of CPU ... I've got this connected to 6 NFS share drives on my data server so it is working hard:

***Coacharnold*** · 08-May-2021, 03:57 AM

Here's what I get from lighttpd

fausto@fausto-snakeoil:~$ sudo systemctl status lighttpd
[sudo] password for fausto:
● lighttpd.service - Lighttpd Daemon
Loaded: loaded (/lib/systemd/system/lighttpd.service; enabled; vendor pres>
Active: active (running) since Thu 2021-05-06 18:24:57 EDT; 21h ago
Main PID: 771 (lighttpd)
Tasks: 6 (limit: 2224)
Memory: 4.8M
CGroup: /system.slice/lighttpd.service
├─771 /usr/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf
├─839 /usr/bin/php-cgi
├─972 /usr/bin/php-cgi
├─973 /usr/bin/php-cgi
├─974 /usr/bin/php-cgi
└─975 /usr/bin/php-cgi

May 06 18:24:56 fausto-snakeoil systemd[1]: Starting Lighttpd Daemon...
May 06 18:24:57 fausto-snakeoil lighttpd[729]: 2021-05-06 18:24:56: configfile.>
May 06 18:24:57 fausto-snakeoil systemd[1]: Started Lighttpd Daemon.
lines 1-17/17 (END)

***agent_kith*** · 08-May-2021, 07:56 AM

Software side seems to be ok. So likely a WebApp issue.

F12 not working? If so, go to the browser menu, and look for anything that says "Web Developer" console. The console looks like this (Slight visual differences depending on the browser you're using, but they all have
the same functionality):

Copy and paste the contents from "Console", and also "Network" so I can have a look. Alternatively, maybe run the installer again and see what happens.

***Coacharnold*** · (This post was last modified: 08-May-2021, 08:27 PM by Coacharnold.)

Here's a mess of what I get in the console .. repeated a lot

[Fri May 7 20:17:18 2021] Code: ff 48 85 c0 0f 84 99 00 00 00 41 80 3c 24 ff 0f 85 b4 00 00 00 48 8b 05 6a 21 0a 00 49 0f be 16 4c 89 f5 64 48 8b 08 48 89 d0 <f6> 44 51 01 20 74 18 0f 1f 44 00 00 48 0f be 55 01 48 83 c5 01 48
[Fri May 7 20:17:25 2021] snakeoil-rest[2977130]: segfault at e5 ip 00007f29cb2edc74 sp 00007f29b7b98540 error 4 in libc-2.33.so[7f29cb1d6000+16b000]
[Fri May 7 20:17:25 2021] Code: ff 48 85 c0 0f 84 99 00 00 00 41 80 3c 24 ff 0f 85 b4 00 00 00 48 8b 05 6a 21 0a 00 49 0f be 16 4c 89 f5 64 48 8b 08 48 89 d0 <f6> 44 51 01 20 74 18 0f 1f 44 00 00 48 0f be 55 01 48 83 c5 01 48
[Fri May 7 20:17:33 2021] snakeoil-rest[2977369]: segfault at e5 ip 00007f798925ac74 sp 00007f7975b05540 error 4 in libc-2.33.so[7f7989143000+16b000]
[Fri May 7 20:17:33 2021] Code: ff 48 85 c0 0f 84 99 00 00 00 41 80 3c 24 ff 0f 85 b4 00 00 00 48 8b 05 6a 21 0a 00 49 0f be 16 4c 89 f5 64 48 8b 08 48 89 d0 <f6> 44 51 01 20 74 18 0f 1f 44 00 00 48 0f be 55 01 48 83 c5 01 48

Here's what I get in NETSTAT --- I re reran the script and got the web browser to work perfectly again .... however, it seems to have killed LMS... can't get it back, I says it's running when I look at the status, but I can't get the web interface.

T

Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:36173 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:30511 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:41977 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:44799 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:33060 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:42183 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:30511 127.0.0.1:43566 TIME_WAIT
tcp 0 0 192.168.1.152:80 192.168.1.151:52610 ESTABLISHED
tcp 0 0 127.0.0.1:30511 127.0.0.1:43476 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43494 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43558 TIME_WAIT
tcp 0 0 192.168.1.152:80 192.168.1.151:52608 TIME_WAIT
tcp 0 0 192.168.1.152:979 192.168.1.18:2049 ESTABLISHED
tcp 0 0 127.0.0.1:30511 127.0.0.1:43540 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43514 TIME_WAIT
tcp 0 0 192.168.1.152:80 192.168.1.151:52600 TIME_WAIT
tcp 0 0 127.0.0.1:43598 127.0.0.1:30511 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43534 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43586 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43572 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43552 TIME_WAIT
tcp 0 0 127.0.0.1:43614 127.0.0.1:30511 ESTABLISHED
tcp 0 0 127.0.0.1:30511 127.0.0.1:43574 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43542 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43478 TIME_WAIT
tcp 0 0 192.168.1.152:80 192.168.1.151:52612 TIME_WAIT
tcp 0 0 192.168.1.152:50082 192.168.1.201:631 TIME_WAIT
tcp 0 0 192.168.1.152:49768 192.168.1.18:631 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43576 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43480 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43506 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43528 TIME_WAIT
tcp 0 0 192.168.1.152:53154 192.168.1.226:3483 ESTABLISHED
tcp 0 0 127.0.0.1:30511 127.0.0.1:43500 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43492 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43516 TIME_WAIT
tcp 0 0 192.168.1.152:80 192.168.1.151:52614 TIME_WAIT
tcp 0 0 192.168.1.152:80 192.168.1.151:52592 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43570 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43614 ESTABLISHED
tcp 0 0 192.168.1.152:80 192.168.1.151:52594 ESTABLISHED
tcp 0 0 127.0.0.1:30511 127.0.0.1:43474 TIME_WAIT
tcp 0 0 127.0.0.1:30511 127.0.0.1:43510 TIME_WAIT

OK ....LMS wouldn't come up at all, so I re-installed LMS from the LMS update file that I grabbed earlier today (well after all the problems started) ... rebooted the machine. Got LMS to come up perfect, but the snake-oil interface has been reduced the white minimal snake oil interface I posted earlier ...

any Ideas where to go next?

Not for nothing this version of LMS seems to be working really well. The material skin interface theme is spectacular, I've been using LMS for a while (even worked for a company selling LMS enabled devices) ...the material skin interface is the best one yet, even better than my android remotes on my android browser..

T

***agent_kith*** · 08-May-2021, 10:56 AM

(08-May-2021, 09:49 AM)Coacharnold Wrote: Here's a mess of what I get in the console .. repeated a lot

[Fri May 7 20:17:18 2021] Code: ff 48 85 c0 0f 84 99 00 00 00 41 80 3c 24 ff 0f 85 b4 00 00 00 48 8b 05 6a 21 0a 00 49 0f be 16 4c 89 f5 64 48 8b 08 48 89 d0 <f6> 44 51 01 20 74 18 0f 1f 44 00 00 48 0f be 55 01 48 83 c5 01 48

Not entirely sure what the problem is... Not supposed to see the Rest server throw errors like this.

Perhaps try and switch to another player and see what happens.. What version of LMS are you using? The one given in the installer, or something else?

I need to know the steps you've done to get to these errors so I can re-create them here.

***Coacharnold*** · 08-May-2021, 08:52 PM

Ok ... so here's the complete list of what I did to get where I am. This is all the sets from my complete history, so not much has been done to this system outside of this.

1 - lubuntu 21.04 clean install

2- Install apache
sudo apt-get install apache2 phpmyadmin lamp-server^ mail-server^ openssh-server^

3 - Install ssh

4 - install NFS server

sudo apt install nfs-kernel-server
sudo apt install nfs-common

5 - run snake oil install script

sudo ./snakeoil-installer-1.2.0-x86_64.sh

6 - apache2 conflicts with snakoil web server - disable apache 2:

sudo systemctl stop apache2
sudo update-rc.d apache2 disable

7 - enable Logitech media server

184 /etc/init.d/logitechmediaserver start
185 /etc/init.d/logitechmediaserver status
186 /etc/init.d/logitechmediaserver enable

8 - to this point the REST server interface was working great. I created several share folders in /media/share and used Snakeoil to mount my NFS shares there for LMS. At this point, I went to LMS, went through it's setup wizard and started the LMS library scan. Sometime in the middle of that scan, the REST server started to malfunction.

9 - DUring the process of playing with LMS after the library scan (while trying to troubleshoot the REST server with you) I ran the LMS update script from LMS
sudo dpkg -i /var/lib/squeezeboxserver/cache/updates/logitechmediaserver_8.1.1_amd64.deb

10 - I reran the SnakeOil script and the REST server started to work again. LMS stopped working though. A check of it's status said it was running (but still no web interface)

11 - I re-ran the LMS .deb from above and LMS now works great again at the cost of the REST server not working again.

That's where I am and pretty much everything I've done up to this point \