Snakeoil Forums - Any Interest in ARMv7 builds

Pages: 1 2 3 4 5 6 7 8 9 10

yes, that was the first thing I did.... no change...
I am reinstalling and trying again....I've updated firmware on the pi, enabled everything that needs enabling...
Lirc seems to be working but not registering input from the /dev/lirc0....
I know the remotes and receivers are good as they work elsewhere...
I know the pins are correct....

(28-Sep-2018, 12:01 PM)Bromf Wrote: [ -> ]yes, that was the first thing I did.... no change...
I am reinstalling and trying again....I've updated firmware on the pi, enabled everything that needs enabling...
Lirc seems to be working but not registering input from the /dev/lirc0....
I know the remotes and receivers are good as they work elsewhere...
I know the pins are correct....

There should be a file called /var/log/lircd.log. Include the last few lines here and I'd have a quick look.

last few lines ..... /var/log/daemon.log

Sep 28 04:23:23 snakeoil systemd[857]: Reached target Basic System.
Sep 28 04:23:23 snakeoil systemd[857]: Reached target Default.
Sep 28 04:23:23 snakeoil systemd[857]: Startup finished in 68ms.
Sep 28 04:23:23 snakeoil systemd[1]: Started User Manager for UID 1000.
Sep 28 04:23:52 snakeoil systemd[1]: Time has been changed
Sep 28 04:23:52 snakeoil systemd[857]: Time has been changed
Sep 28 04:23:52 snakeoil systemd[1]: apt-daily-upgrade.timer: Adding 12min 34.701117s random time.
Sep 28 04:23:52 snakeoil systemd[1]: apt-daily.timer: Adding 2h 32min 56.755686s random time.
Sep 28 04:24:01 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: caught signal
Sep 28 04:24:01 snakeoil systemd[1]: Stopping Flexible IR remote input/output application support...
Sep 28 04:24:01 snakeoil systemd[1]: Stopped Flexible IR remote input/output application support.

also I note much earlier on there is this...

Code:
Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Info: lircd:  Opening log, level: Info

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: Using systemd fd

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Warning: Running as root

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Info: Using remote: devinput.

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_MISC

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_MOUSE

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_SOUTH

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_TOOL_PEN

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_TRIGGER

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_TRIGGER_HAPPY1

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_WHEEL

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Info: Using remote: devinput.

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_MISC

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_MOUSE

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_SOUTH

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_TOOL_PEN

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_TRIGGER

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_TRIGGER_HAPPY1

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput: Multiple values for same code: BTN_WHEEL

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Warning: Duplicate remotes "devinput" found, problems ahead

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: lircd(default) ready, using /var/run/lirc/lircd

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: accepted new client on /var/run/lirc/lircd

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Info: [lirc] protocol is enabled

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: accepted new client on /var/run/lirc/lircd

Sep 28 04:23:12 snakeoil lircd[621]: lircd-0.9.4c[621]: Notice: accepted new client on /var/run/lirc/lircd

I'm looking at /etc/lirc/lircd.conf.d/devinput.lircd.conf

Also last line of dmesg is...
[ 19.430014] input: lircd-uinput as /devices/virtual/input/input5

Hmmm.. Still at work so can't work this out. Will see if i can get some time to look into this later today, and if not the weekend.

In the mean time. Modify /config.txt and comment out the 'kernel=' line. This will fall back to the stock kernel. See if that works. That should tell me if it's a software that's missing in the OS, or a module that's missing in the RT kernel.

(28-Sep-2018, 01:02 PM)agent_kith Wrote: [ -> ]Hmmm.. Still at work so can't work this out. Will see if i can get some time to look into this later today, and if not the weekend.

In the mean time. Modify /config.txt and comment out the 'kernel=' line. This will fall back to the stock kernel. See if that works. That should tell me if it's a software that's missing in the OS, or a module that's missing in the RT kernel.

It's the RT kernel... Wink

LIRC works exactly as it should after commenting it out and rebooting.

(28-Sep-2018, 01:51 PM)Bromf Wrote: [ -> ]
(28-Sep-2018, 01:02 PM)agent_kith Wrote: [ -> ]Hmmm.. Still at work so can't work this out. Will see if i can get some time to look into this later today, and if not the weekend.

In the mean time. Modify /config.txt and comment out the 'kernel=' line. This will fall back to the stock kernel. See if that works. That should tell me if it's a software that's missing in the OS, or a module that's missing in the RT kernel.

It's the RT kernel... LIRC works exactly as it should after commenting it out and rebooting.

Cool, that means I've forgotten to include one of the modules. Can you cut and paste the contents of /proc/modules? I'd have to take a look at that.

Hope it's just that I'm missed a driver, and not because lirc actually requires lirc to be loaded as a module.. That'd will suck... Cry

Here you go... the contents of /proc/modules from the stock kernel

Code:
uinput 20480 1 - Live 0x7f515000

cmac 16384 1 - Live 0x7f50d000

bnep 20480 2 - Live 0x7f503000

hci_uart 36864 1 - Live 0x7f4f4000

btbcm 16384 1 hci_uart, Live 0x7f4ed000

serdev 20480 1 hci_uart, Live 0x7f4e3000

bluetooth 368640 24 bnep,hci_uart,btbcm, Live 0x7f475000

ecdh_generic 28672 1 bluetooth, Live 0x7f46b000

brcmfmac 307200 0 - Live 0x7f3a7000

brcmutil 16384 1 brcmfmac, Live 0x7f397000

cfg80211 573440 1 brcmfmac, Live 0x7f219000

rfkill 28672 4 bluetooth,cfg80211, Live 0x7f1ff000

snd_bcm2835 32768 0 - Live 0x7f1f2000 (C)

snd_soc_bcm2835_i2s 16384 0 - Live 0x7f1ea000

i2c_bcm2835 16384 0 - Live 0x7f1e2000

snd_soc_core 188416 1 snd_soc_bcm2835_i2s, Live 0x7f19f000

snd_compress 20480 1 snd_soc_core, Live 0x7f195000

snd_pcm_dmaengine 16384 1 snd_soc_core, Live 0x7f18e000

snd_pcm 98304 4 snd_bcm2835,snd_soc_bcm2835_i2s,snd_soc_core,snd_pcm_dmaengine, Live 0x7f16a000

snd_timer 32768 1 snd_pcm, Live 0x7f15c000

snd 69632 5 snd_bcm2835,snd_soc_core,snd_compress,snd_pcm,snd_timer, Live 0x7f141000

lirc_rpi 16384 2 - Live 0x7f138000 (C)

lirc_dev 16384 1 lirc_rpi, Live 0x7f11f000

uio_pdrv_genirq 16384 0 - Live 0x7f0f7000

uio 20480 1 uio_pdrv_genirq, Live 0x7f0b7000

fixed 16384 0 - Live 0x7f0a1000

ip_tables 24576 0 - Live 0x7f096000

x_tables 32768 1 ip_tables, Live 0x7f087000

ipv6 434176 22 [permanent], Live 0x7f000000

lirc_rpi... Not entirely sure what that is, but just the name tells me probably need to include that for this to work (I need a facepalm emoji here)...

Will update the kernel and let you know when it's ready.

Quote:(I need a facepalm emoji here)

lol...

Meantime I can get Lirc working with the stock kernel and start the write up !

Edit... ok! now the modules are present on stock kernel... Smile

Code:
pi@snakeoil:~ $ lsmod | grep lirc

lirc_rpi               16384  2

lirc_dev               16384  1 lirc_rpi

On the stock kernel I now have Lirc working to control mpd. Smile

starts at boot. Only had to add a couple of other packages.
All the usual stop play pause navigation and shutdown.
Tomorrow I will reinstall the Oled display and test all together.

I don't know enough about LMS to get it running there... perhaps a LMS user could try that...I would be happy to help
.

Pages: 1 2 3 4 5 6 7 8 9 10