Hi, im bought more powerful INTEL NUC - 5I7RYH, after fresh installation 1.1.0 + update 1.1.9 (no upgrade to Ubuntu 18), everything works, booting normally, but sometime system not boot , now hang in message "UPDATE UTMP about System Runlevel Changes" , i dont know why, because NUC doesnt have NVIDIA card, please help me determine where is the problem , no snakeoil - no music
(
Thanks
(03-Jun-2020, 01:37 AM)ravenman Wrote: [ -> ]Hi, im bought more powerful INTEL NUC - 5I7RYH, after fresh installation 1.1.0 + update 1.1.9 (no upgrade to Ubuntu 18), everything works, booting normally, but sometime system not boot , now hang in message "UPDATE UTMP about System Runlevel Changes" , i dont know why, because NUC doesnt have NVIDIA card, please help me determine where is the problem , no snakeoil - no music (
Thanks
This could be a graphics driver problem. Can you confirm if the Snakeoil computer is working even when you see the above message? i.e. try to ping the machine, try to go to the WebApp.. Do any of those actions work?
Let me know if:
1. You can ping the snakeoil PC. Find the IP address of your NUC, and from a second computer run this command: ping a.b.c.d (where a.b.c.d is your NUC's IP address)
2. Load a web browser and try to connect to the WebApp (
http://a.b.c.d)
Can you do 1 but not 2? Or both are not working?
Solved!, my fault, clean installation shows login prompt with ip adress, after upgrade not, but system works as it should. Last question, it possible upgrade to latest LMS from official servers
https://mysqueezebox.com/download
and install it? Didn't have snakeoil special custom precompiled version? Actual version not decoding APE and WAwpack, CUE handling is not good also.
Thank you for quick reply and have a nice day.
(03-Jun-2020, 03:38 PM)ravenman Wrote: [ -> ]Solved!, my fault, clean installation shows login prompt with ip adress, after upgrade not, but system works as it should. Last question, it possible upgrade to latest LMS from official servers https://mysqueezebox.com/download
and install it? Didn't have snakeoil special custom precompiled version? Actual version not decoding APE and WAwpack, CUE handling is not good also.
Thank you for quick reply and have a nice day.
Yes, just download the deb file and drop it into the install window. For best practices, SSH into the machine after install and run:
Code:
systemctl disable logitechmediaserver
This will prevent LMS from starting automatically on reboot, and let Snakeoil handle this service.