Snakeoil Forums

Full Version: Snakeoil Firmware - 1.2.11 (Gear Isolation U11)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4
(26-Apr-2023, 04:05 PM)Tecko Wrote: [ -> ]
(25-Apr-2023, 12:54 AM)hkphantomgtr Wrote: [ -> ]
(24-Apr-2023, 05:51 PM)Tecko Wrote: [ -> ]
(24-Apr-2023, 05:50 AM)Snoopy8 Wrote: [ -> ]
(24-Apr-2023, 01:50 AM)Tecko Wrote: [ -> ]I am using this firmware. But my dac is not detected. I use the new ubuntu 23.04. Is that the reason it does not work? 

I can not use ubuntu server because (usbc) network adapter does not work with ubuintu server
I assume you are using USB.  Have you tried another USB port and another USB cable? Also, what version of Ubuntu was it previously working with?

Yes USB dac. I think it was version 23.04 from Ubuntu that was the problem. Installed  22.04.2 LTS . Works now.

Did you install the low latency kernel, or even the real time kernel yet?

Just the generic kernel. That is the only option in snakeoil OS.

After updateing OS NAS is not able to add NAS to snakeoil-os. (cifs)

I need to reinstall the system got errors when adding NAS:

 Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:30:57 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:30:57 2023] CIFS: VFS: session 00000000d3175c3b has no tcon available for a dfs referral request
[wo apr 26 10:30:57 2023] CIFS: VFS: cifs_mount failed w/return code = -13
[wo apr 26 10:31:01 2023] CIFS: Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:31:01 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:31:01 2023] CIFS: VFS: session 000000007a969d5c has no tcon available for a dfs referral request
[wo apr 26 10:31:01 2023] CIFS: VFS: cifs_mount failed w/return code = -13

sudo apt install linux-lowlatency -y
(26-Apr-2023, 04:05 PM)Tecko Wrote: [ -> ][wo apr 26 10:31:01 2023] CIFS: VFS: cifs_mount failed w/return code = -13
It appears that your NAS is using SMB1 only. Can you change it to use SMB2 or 3?
(26-Apr-2023, 09:53 PM)hkphantomgtr Wrote: [ -> ]
(26-Apr-2023, 04:05 PM)Tecko Wrote: [ -> ]
(25-Apr-2023, 12:54 AM)hkphantomgtr Wrote: [ -> ]
(24-Apr-2023, 05:51 PM)Tecko Wrote: [ -> ]
(24-Apr-2023, 05:50 AM)Snoopy8 Wrote: [ -> ]I assume you are using USB.  Have you tried another USB port and another USB cable? Also, what version of Ubuntu was it previously working with?

Yes USB dac. I think it was version 23.04 from Ubuntu that was the problem. Installed  22.04.2 LTS . Works now.

Did you install the low latency kernel, or even the real time kernel yet?

Just the generic kernel. That is the only option in snakeoil OS.

After updateing OS NAS is not able to add NAS to snakeoil-os. (cifs)

I need to reinstall the system got errors when adding NAS:

 Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:30:57 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:30:57 2023] CIFS: VFS: session 00000000d3175c3b has no tcon available for a dfs referral request
[wo apr 26 10:30:57 2023] CIFS: VFS: cifs_mount failed w/return code = -13
[wo apr 26 10:31:01 2023] CIFS: Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:31:01 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:31:01 2023] CIFS: VFS: session 000000007a969d5c has no tcon available for a dfs referral request
[wo apr 26 10:31:01 2023] CIFS: VFS: cifs_mount failed w/return code = -13

sudo apt install linux-lowlatency -y

I did install it same problem as before

(27-Apr-2023, 05:51 AM)Snoopy8 Wrote: [ -> ]
(26-Apr-2023, 04:05 PM)Tecko Wrote: [ -> ][wo apr 26 10:31:01 2023] CIFS: VFS: cifs_mount failed w/return code = -13
It appears that your NAS is using SMB1 only. Can you change it to use SMB2 or 3?

Does not make any difference I am stuck to 1.2.6
[Image: smb123.png]
(27-Apr-2023, 08:35 PM)Tecko Wrote: [ -> ]
(26-Apr-2023, 09:53 PM)hkphantomgtr Wrote: [ -> ]
(26-Apr-2023, 04:05 PM)Tecko Wrote: [ -> ]
(25-Apr-2023, 12:54 AM)hkphantomgtr Wrote: [ -> ]
(24-Apr-2023, 05:51 PM)Tecko Wrote: [ -> ]Yes USB dac. I think it was version 23.04 from Ubuntu that was the problem. Installed  22.04.2 LTS . Works now.

Did you install the low latency kernel, or even the real time kernel yet?

Just the generic kernel. That is the only option in snakeoil OS.

After updateing OS NAS is not able to add NAS to snakeoil-os. (cifs)

I need to reinstall the system got errors when adding NAS:

 Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:30:57 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:30:57 2023] CIFS: VFS: session 00000000d3175c3b has no tcon available for a dfs referral request
[wo apr 26 10:30:57 2023] CIFS: VFS: cifs_mount failed w/return code = -13
[wo apr 26 10:31:01 2023] CIFS: Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:31:01 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:31:01 2023] CIFS: VFS: session 000000007a969d5c has no tcon available for a dfs referral request
[wo apr 26 10:31:01 2023] CIFS: VFS: cifs_mount failed w/return code = -13

sudo apt install linux-lowlatency -y

I did install it same problem as before

(27-Apr-2023, 05:51 AM)Snoopy8 Wrote: [ -> ]
(26-Apr-2023, 04:05 PM)Tecko Wrote: [ -> ][wo apr 26 10:31:01 2023] CIFS: VFS: cifs_mount failed w/return code = -13
It appears that your NAS is using SMB1 only. Can you change it to use SMB2 or 3?

Does not make any difference I am stuck to 1.2.6
[Image: smb123.png]

sudo apt install linux-lowlatency -y

The above commands can't solve mounting problem but will get you the low latency kernel and then you'll see and choose in the OS WebUI.
(28-Apr-2023, 12:22 PM)hkphantomgtr Wrote: [ -> ]
(27-Apr-2023, 08:35 PM)Tecko Wrote: [ -> ]
(26-Apr-2023, 09:53 PM)hkphantomgtr Wrote: [ -> ]
(26-Apr-2023, 04:05 PM)Tecko Wrote: [ -> ]
(25-Apr-2023, 12:54 AM)hkphantomgtr Wrote: [ -> ]Did you install the low latency kernel, or even the real time kernel yet?

Just the generic kernel. That is the only option in snakeoil OS.

After updateing OS NAS is not able to add NAS to snakeoil-os. (cifs)

I need to reinstall the system got errors when adding NAS:

 Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:30:57 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:30:57 2023] CIFS: VFS: session 00000000d3175c3b has no tcon available for a dfs referral request
[wo apr 26 10:30:57 2023] CIFS: VFS: cifs_mount failed w/return code = -13
[wo apr 26 10:31:01 2023] CIFS: Attempting to mount \\192.168.1.30\MusicServer
[wo apr 26 10:31:01 2023] CIFS: VFS: \\192.168.1.30 failed to connect to IPC (rc=-13)
[wo apr 26 10:31:01 2023] CIFS: VFS: session 000000007a969d5c has no tcon available for a dfs referral request
[wo apr 26 10:31:01 2023] CIFS: VFS: cifs_mount failed w/return code = -13

sudo apt install linux-lowlatency -y

I did install it same problem as before

(27-Apr-2023, 05:51 AM)Snoopy8 Wrote: [ -> ]
(26-Apr-2023, 04:05 PM)Tecko Wrote: [ -> ][wo apr 26 10:31:01 2023] CIFS: VFS: cifs_mount failed w/return code = -13
It appears that your NAS is using SMB1 only. Can you change it to use SMB2 or 3?

Does not make any difference I am stuck to 1.2.6
[Image: smb123.png]

sudo apt install linux-lowlatency -y

The above commands can't solve mounting problem but will get you the low latency kernel and then you'll see and choose in the OS WebUI.

Now I understand you have to choose lowlatency in OS. Than update to 1.2.11., that works... but after reboot mount discapears.
Здравствуйте, отправил пожертвование, но по данным с почты активация не проходит, это потому что я из России!?


Mod: Removed email to deter spam bots.
(03-May-2023, 01:32 AM)Max2502874 Wrote: [ -> ]Здравствуйте, отправил пожертвование, но по данным с почты активация не проходит, это потому что я из России!?

Google translated to "Hello, I sent a donation, but according to the data from the mail, the activation does not go through, is it because I'm from Russia!?"

Thank you. Agent Kith is probably away for work and will reply when back.
(29-Apr-2023, 07:28 PM)Tecko Wrote: [ -> ]Now I understand you have to choose lowlatency in OS. Than update to 1.2.11., that works... but after reboot mount discapears.
-13 means authentication failure. Do you have a user/password set for this share? If yes, please enter the correct credentials and try to mount again. Not a good idea to use SMBv1 if you are using credentials. Only use SMBv1 for public shares (no passwords).
(03-May-2023, 01:32 AM)Max2502874 Wrote: [ -> ]Здравствуйте, отправил пожертвование, но по данным с почты активация не проходит, это потому что я из России!?


Mod: Removed email to deter spam bots.
Have sent you an email. Please recheck and confirm if it works now.
 
(03-May-2023, 09:19 AM)Snoopy8 Wrote: [ -> ]Google translated to "Hello, I sent a donation, but according to the data from the mail, the activation does not go through, is it because I'm from Russia!?"

Thank you. Agent Kith is probably away for work and will reply when back.
Thank you. Technically not away for work, just working. Flat out at least 12+ hours a day (more if I'm working from home)...
(03-May-2023, 04:57 PM)agent_kith Wrote: [ -> ]
(03-May-2023, 01:32 AM)Max2502874 Wrote: [ -> ]Здравствуйте, отправил пожертвование, но по данным с почты активация не проходит, это потому что я из России!?


Mod: Removed email to deter spam bots.
Have sent you an email. Please recheck and confirm if it works now.
 
(03-May-2023, 09:19 AM)Snoopy8 Wrote: [ -> ]Google translated to "Hello, I sent a donation, but according to the data from the mail, the activation does not go through, is it because I'm from Russia!?"

Thank you. Agent Kith is probably away for work and will reply when back.
Thank you. Technically not away for work, just working. Flat out at least 12+ hours a day (more if I'm working from home)...

Dear kith…Snake oil is a nice os for hifi~but I found a bug in web-ui~When i change language into 简体中文~It looks nothing wrong then~But as long as I close browser or reflash this web~it gose english again~and config is still 简体中文…Maybe that's something wrong in web-ui or web engine~would you please Have a look at this?
Pages: 1 2 3 4