Any Interest in ARMv7 builds

[agent_kith]

Fixed !!!!!!    LIRC is working !!!!  On the rtkernel.... so no need to recompile with modules.....

For some odd reason the rt-kernel does not use /dev/lirc0   but does use /dev/lirc1

Having found that and run the lirc configuration using /dev/lirc1 it all completes and works..

Nicely done... can you check /etc/udev/, somewhere in there should have two entries for lirc0 and lirc1...

Delete them both, and reboot. the device should now show up as /dev/lirc0 then.

[Bromf]

looked in /etc/udev/.... contains  hwdb.d  rules.d  udev.conf 
No lirc reference in the last two and the first returns to the prompt when running ls

[agent_kith]

looked in /etc/udev/.... contains  hwdb.d  rules.d  udev.conf 
No lirc reference in the last two and the first returns to the prompt when running ls

It should be inside rules.d

try and do a 

Code:

grep lirc /etc/udev -R

[Bromf]

pi@snakeoil:~ $ grep lirc /etc/udev -R
pi@snakeoil:~ $ cd /etc/udev/
pi@snakeoil:/etc/udev $ ls
hwdb.d  rules.d  udev.conf
pi@snakeoil:/etc/udev $ cd rules.d
pi@snakeoil:/etc/udev/rules.d $ ls
99-com.rules
pi@snakeoil:/etc/udev/rules.d $ nano 99-com.rules

and the 99-com.rules contains.... (no lirc0 or lirc1)

Code:

SUBSYSTEM=="input", GROUP="input", MODE="0660"
SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660"
SUBSYSTEM=="spidev", GROUP="spi", MODE="0660"
SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660"

SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"
SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\
        chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\
        chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770 /sys/devic$
        chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\
'"

KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\
        ALIASES=/proc/device-tree/aliases; \
        if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \
                echo 0;\
        elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \
                echo 1; \
        else \
                exit 1; \
        fi\
'", SYMLINK+="serial%c"

KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\
        ALIASES=/proc/device-tree/aliases; \
        if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \
                echo 0; \
        elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \
                echo 1; \
        else \
                exit 1; \
        fi \
'", SYMLINK+="serial%c"

[agent_kith]

Hmm. interesting.. Probably leave it be, if it works now, probably not a good idea to break it. :wacky:

[Bromf]

Hmm. interesting.. Probably leave it be, if it works now, probably not a good idea to break it.

To which I concur wholeheartedly...

[Bromf]

Is mpd built with the fifo plugin ?
https://github.com/MusicPlayerDaemon/MPD...Plugin.cxx

I'm trying to get the spectrum analyser running on the Oled display but keep getting this error...
**** 2018-10-04T13:31:23
**** MPD (v20)

Executable: cd /var/www;_NAME="USB Audio" _OUTPUT="hw:1,0" _FORMAT="dop" _OPTIONS=""  /var/www/players/mpd-v20/init /var/www/players/mpd-v20 2>&1;/var/www/players/mpd-v20/start /var/www/players/mpd-v20 2>&1;
exception: Failed to configure output in line 380
exception: nested: No such audio output plugin: fifo

[agent_kith]

Is mpd built with the fifo plugin ?
https://github.com/MusicPlayerDaemon/MPD...Plugin.cxx

I'm trying to get the spectrum analyser running on the Oled display but keep getting this error...
**** 2018-10-04T13:31:23
**** MPD (v20)

Executable: cd /var/www;_NAME="USB Audio" _OUTPUT="hw:1,0" _FORMAT="dop" _OPTIONS=""  /var/www/players/mpd-v20/init /var/www/players/mpd-v20 2>&1;/var/www/players/mpd-v20/start /var/www/players/mpd-v20 2>&1;
exception: Failed to configure output in line 380
exception: nested: No such audio output plugin: fifo

No it's not.. Don't think adding that will affect SQ, will rebuild MPD with FIFO and then you can try again. Can't do this now, but hopefully later tonight when I get home (if not Friday or the weekend)...

[Bromf]

Firmware with Mpd and fifo fixed the display output

[Bromf]

Trying to copy files from PC to Pi..... samba is set in snakeoil but connection is refused...
Tried every combination I can think of but no joy.
Standard Snakeoil is simply a matter of specifying  smb://<ip address> but that fails on the pi....