[split] I2S I-Sabre V3 DAC ESS ES9023

[NormAudio]

Hello,
please can you help me to add I2S  I-Sabre V3 DAC ESS ES9023 (for rasptouch from Audiophonics)

with sudo nano /boot/config.txt
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on

[agent_kith]

Hello,
please can you help me to add I2S  I-Sabre V3 DAC ESS ES9023 (for rasptouch from Audiophonics)

with sudo nano /boot/config.txt
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on

Hi Norm,

Snakeoil OS is not locked down. You can SSH into your Pi and modify these settings yourself.

Having said that, I am going to focus more on Pi from now on, and parts of that will include inline modification of /boot/config.txt from the webapp.. Have already ordered some of the parts for this, but because of COVID, it will probably take another 30+ days for 'em to get here.

[NormAudio]

Hello,
please can you help me to add I2S  I-Sabre V3 DAC ESS ES9023 (for rasptouch from Audiophonics)

with sudo nano /boot/config.txt
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on

Hi Norm,

Snakeoil OS is not locked down. You can SSH into your Pi and modify these settings yourself.

Having said that, I am going to focus more on Pi from now on, and parts of that will include inline modification of /boot/config.txt from the webapp.. Have already ordered some of the parts for this, but because of COVID, it will probably take another 30+ days for 'em to get here.

hello, i allready tried but no change
I also tried dtoverlay but no change neither:

Code:

dtoverlay=hifiberry-dacplus

Code:

and also dtoverlay=hifiberry-dac

[agent_kith]

hello, i allready tried but no change
I also tried dtoverlay but no change neither:

Code:

dtoverlay=hifiberry-dacplus

Code:

and also dtoverlay=hifiberry-dac

Hmm. Can you:

1. Generate a diagnostic file and send it to me?
   
2. Use another micro-sd card and use normal Buster image, is your DAC working in that setup?
   

[NormAudio]

hello agent kith,

Can't boot on buster image: only multicolor screen)!
can boot with "snakeoil-armv7l-1.1.0"image, but I2S dac not found . i genarated the diag file, but impossible to download it: only circles (blue/red/yellow turning
I tried to updateversion 1.11: OK, but always impossible to download diag file
Thanks for your time :)

[agent_kith]

You're using Raspberry Pi 3 I assume?

[NormAudio]

You're using Raspberry Pi 3 I assume?

Hello,
Yes you're right, it is a Pi 3

[agent_kith]

Hello,
Yes you're right, it is a Pi 3

Unfortunately I only have Pi4s at the moment. Will try and see if I can dig up a Pi 3 somewhere.

Until then, can you cut and paste /boot/config.txt and put it here? Thanks.

Also, when you are at the 3 spinning circles, can you press F12, click on the console tab, and then do a screencap of the console error messages? Interested to see what the problem is.

[Bromf]

try in /boot/config.txt both...

Code:

dtoverlay=hifiberry-dac

and

Code:

dtparam=audio=off

 the second turns off the onboard audio=Pi 3.5mm out.